Car Camera DVR Video Recorder PCB Assembly
What is a driving recorder?
The driving recorder is the instrument of related information such as video and sound of the vehicle on the road. After installing the driving recorder, video images and sounds that can record the entire process of driving the car can provide evidence for traffic accidents. Those who like self-driving can also use it to record the process of conquering difficult and dangerous obstacles. The PCB board is the core component of the drive recorder. The purpose of this product is to provide a PCB motherboard based on the car recorder, which solves the current method of installing the PCB motherboard of the car recorder. Insufficient problems with disassembly and installation during maintenance.
Car Camera DVR Video Recorder PCB Assembly
* Archivo de placa de PCB con lista de piezas proporcionada por los clientes
* Tablero PCB hecho, piezas de placa de circuito compradas por nosotros
* Placa PCB con piezas ensambladas
* Placa de circuito de pruebas electrónicas o PCBA
* Entrega rápida, paquete antiestático
* Compatible con la directiva ROHS, sin plomo
* Un servicio de parada para Diseño de PCB, Diseño de PCB, Fabricación de PCB, Compras de componentes, Ensamblaje de PCB, prueba, Embalaje y entrega de PCB
Servicio de fabricación de PCBA de LeadSIntec
* Fabricación de PCB de 1-32 capa. (lado individual, lado doble, multicapa, Tablero de HDI, enterrar & tablero de agujeros ciegos, etc.)
* Adquisición y gestión de materiales
* Prototipo PCBA de giro rápido y NPI (Introducción al nuevo producto)
* PCBA y el ensamblaje de agujeros a través de
* IC Prerogramación & Verificación de funciones & Quemar en las pruebas
* Ensamblaje de la unidad completa (El edificio de la caja incluye el plástico, pantalla, recinto de metal, membrana, bobinas, arnés de alambre, etc.)
* Se acepta un pequeño volumen y se aceptan soluciones de modelos de alta mezcla
* AOI, En prueba de circuito, Colocación de BGA
* Soporte de ingeniería, incluido el final de la vida y el reemplazo obsoleto de componentes y el soporte de diseño para el circuito, metal,carcasa de plástico y embalaje
Capacidad de fabricación de PCB de LeadSIntec
Procesamiento de superficie | HASL/Plating gold / immersion gold /Plating gold finger/OSP/ Flux |
Capas | 1~ 32 capas |
Espesor de cobre | O.5oz ~ 5oz |
Espesor de la tabla | 0.2mm ~ 6.0 mm |
Tamaño de agujero mínimo | 0.2mm |
Ancho de línea mínimo | 0.1mm |
Min Line Spacing | 0.1mm |
Max board Size | 508mm*609 mm |
Solder mask type | Green/ Black/ Red/ Yellow/ White/Blue… |
Silkscreen color | Blanco / Yellow/ Black |
Data file format | Archivo Gerber y el archivo de perforación correspondiente, Serie de protel, Lista de BOM |
Base material | FR4, Cem3, Ptfe, A base de aluminio, Alto tg fr4, Tablero de alta frecuencia, Rogers |
PCB board design for drive recorder
1. A PCB motherboard based on the car driving recorder. The inner bottom wall of the house is fixed with a rod. The surface of the support rod is fixed with a tray. On the surface connected to the pores, the surface of the support rod is inserted with the inner insertion of the pores, the inner wall of the passing hole is opened with a curved groove, the left side of the support rod is opened with telescopic grooves, and the right inner wall of the telescopic slot is fixed. Spring, the left end of the spring is fixed with positioning, the left end of the positioning and the inner card of the arcuate groove of positioning, the top of the support rod is opened with a ring groove, the inner activity of the ring groove is connected to the slider, the upper surface of the slider fixes connecting connections. There are arc-shaped rods, the lower surface of the curved rod overlaps the surface of the motherboard.
2. The inner bottom wall of the housing is fixed with a bracket with two brackets.
3. The tops of the two brackets are fixed to the limited seat, and the interior of the two limited seats is connected to the lower left and lower right corners of the motherboard.
4. There is a card slot on the lower surface of the motherboard, the inner card of the card slot is connected to the card, and the lower surface of the card is fixed with the upper surface of the tray.
5. The left end of the sales positioning is arc design.
Nuestro equipo de expertos
Habla con los expertos
Permítanos ayudarlo a comenzar con nuestro servicio de fabricación de productos electrónicos superiores (EMS). Puede comunicarse con nosotros por la información de contacto a continuación.
O puede completar el formulario a la derecha para llegar directamente a nosotros, Te responderemos de una vez.