Household wireless charger (OEM / ODM)
We are a professional wireless charger line board custom processing manufacturer. The wireless charging module can be used for electronic equipment that usually uses close -range wireless charging or power supply. It consists of a transmitter and insulating coil, which can replace wireless power, with a stable 5V output voltage and maximum 700mA output current.
Introduction to Wireless Chargers
This approval sheet describes the detail of the 5W digital demodulation wireless electrical,
function and physical characteristics of charge transmitter, the transmitter compatible with WPC – Qi V1.2.4 standards, support for transmitting and receiving bi-directional.The operating frequency is 110KHz-205KHz, and the transmitter and receiver coil must be kept 2mm-6mm.
The application block diagram
* Fabricación de PCB de 1-32 capa. (lado individual, lado doble, multicapa, Tablero de HDI, enterrar & tablero de agujeros ciegos, etc.)
* Adquisición y gestión de materiales
* Prototipo PCBA de giro rápido y NPI (Introducción al nuevo producto)
* PCBA y el ensamblaje de agujeros a través de
* IC Prerogramación & Verificación de funciones & Quemar en las pruebas
* Ensamblaje de la unidad completa (El edificio de la caja incluye el plástico, pantalla, recinto de metal, membrana, bobinas, arnés de alambre, etc.)
* Se acepta un pequeño volumen y se aceptan soluciones de modelos de alta mezcla
* AOI, En prueba de circuito, Colocación de BGA
* Soporte de ingeniería, incluido el final de la vida y el reemplazo obsoleto de componentes y el soporte de diseño para el circuito, metal,carcasa de plástico y embalaje
.
Input Characteristics
Input Voltage:InpuVoltage range:5Vdc±5%.
Input Current:In the case of full load,Input 5Vdc the highest input current 2Arms.
Stand-by Power Consumption:Standby power consumption is less than 100mW.
Dynamic Power Lock:Input power belong to the weak power souce ,( Input power is not enough), the transmitter must offer the power output.
Output Characteristics
Output Characteristics
The output voltage, output current meets the following criteria:
Output Protection
Short Circuit Protection:In the case of receiver output short circuit, the transmitter stops working, when the receiver is removed, the transmitter will return to normal work.
Over Current Protection:After triggering the over current protection, the transmitter stops working and the transmitter will return to normal operation when the receiver is removed.
Over Temperature Protection:The control D8105 temperature of the transmitter is above 80℃ , the transmitter to stop working, when the receiver is removed and the temperature dropped to normal conditions, the transmitter back to normal work.
Parasitic Metal Object Detect:When the transmitter coil is detected the metal larger than the coin size , the transmitter stops working,and the transmitter returns to normal working after the metal is removed.
Foreign Object Detect:In the case of the normal work of the transmitters and receivers, the coin size metal is inserted between the transmitting coil and the receiving coil. The transmitter must be stopped within 2 minutes (the receiver protocol version requires WPC1.1 or above).
Vertex Shutdown:In the case of the normal work of the transmitters and receivers, receiver coil position relative to the transmitter coil displacement , causes transmitter coil over voltage,y
transmitter must enter the current limit mode, in order to protect the transmitter.
Environmental Conditions
Operating Temperature:0℃ to 40℃
Storage Temperature:-20℃ to 80℃
Operating Humidity:10% a 70% RH
Storage Humidity:10% a 80% RH
Nuestro equipo de expertos
Habla con los expertos
Permítanos ayudarlo a comenzar con nuestro servicio de fabricación de productos electrónicos superiores (EMS). Puede comunicarse con nosotros por la información de contacto a continuación.
O puede completar el formulario a la derecha para llegar directamente a nosotros, Te responderemos de una vez.