Dental X-ray machine introduction
A portable dental X-ray machine is a must-have dental diagnostic facility for shooting single dental images. It uses the principle of X-ray imaging to produce images of light and dark differences, which is convenient for doctors to diagnose patients. It is very important for dentists to obtain a clear X -ray map of the patient teeth. It helps doctors better understand the problem of teeth, so as to propose a better treatment plan.
Compared to traditional wall-mounted machines, portable X-ray capabilities can better adapt to patients. Children and the elderly, as well as patients with physical disabilities or special needs, are more likely to sit or lie in a dental operating chair for examination. In this case, handheld equipment can reduce their fear and relax them. Holding a dental X-ray machine can also be easier to position at any angle you need, and they provide space-saving options for small clinics.
Dental X-optical machine application
Dental X-ray machines are mainly used in dental clinics, comparing treatment before treatment, comparing treatment effects in treatment, and confirming treatment effects after treatment. For tooth extraction, you want to know the internal tissue structure of the tooth bed, the depth of the root of the tooth, the degree of pulp inflammation, and even the internal condition of the tooth fracture. It is essential equipment in the daily work of the clinic. Because the dose is small, there is no need to protect it. Some hospitals buy finger and toe shots for bed detection.
product composition
The portable dental X-ray machine consists of two parts: the host and the ball head. The host is mainly composed of the power supply part, the data central processor, and the oscillating, amplifying and feedback parts. Insulation and sealing, and other parts. The accessory part of the auxiliary is mold injection and lead seal protection.
Electrical parameters
1. X-ray tube parameters: 0.4 focus, oblique angle 12 degrees, working parameters (exposure parameters): 60kV, 1.2ma.
2. Exposure time: 0.13S-2S.
3. Use 10C high magnification 14500 battery pack, battery capacity: 6S-1100mAh.
The battery voltage is 25.2V.
4. Reverse frequency: 30kHz
5. IPS full-angle industrial capacitive touch LCD screen, 3.5 inch/resolution 480*320.
6. Standby power consumption: 2W, shutdown power consumption <0.1W, working power consumption> 110W.
7. The size of the power board drive board is only: 10cm*6.5cm. LCD touchpad size: 10cm*6.0cm.
Features
1. Battery anti-connect protection to reduce batch production error operation board burn damage.
2. Complete power supply protection measures, battery overvoltage, low voltage (OVP, LVP) protection, and short circuit overcurrent (OCP) protection.
3. Number of filled energy continuously exposed 250 times (less than 0.25s)
4. The ray source component uses a multilayer lead foil to reduce radiation, plus an insulating paper foil.
5. The circuit can automatically detect the power supply and high voltage opening of the filament to be exposed at the same time to avoid invalid exposure or high voltage penetration damage caused by unilateral opening.
6. High efficiency closed loop feedback loop control makes the high voltage output stable and low ripple characteristics. The constant current control filament current causes the tube current to stabilize.
7. Repeat the tests for 3 seconds until the battery is exhausted.
8. All circuits are independently developed, proficient in and mastering key technologies, providing parameter research and development changes, and customized customization.
Precautions
1. During shooting, the angle of application of dental tablets. The tooth. The head of the ball head must be correct. At the end of the countdown, it must be stable. Do not change the position of the three.
2. Please turn off the power after use.
3. Start shooting after starting for a minute to keep the ray output stable.
4. When the battery power is insufficient, the machine will enter the automatic protection state. At this time, normal film work cannot be performed.
5. During the filming process, press the exposure keys to stop working urgently and return to the preparation state.
6. Use randomly matched dental slices and a medicinal solution. Or buy genuine dental slices and medicinal solution at the manufacturer and regular channels, otherwise it will affect the shooting results.
7. Please put it lightly when using it to prevent people from damaging valuable ball pipes.
8. If you find that the machine has a phenomenon that cannot be started normally and the problem cannot be solved, contact the manufacturer or distribution unit on time. Don’t take the machine off yourself.
leadsintec Services
We provide retail, wholesale, OEM services for dental X-ray machines. We have our own processing and assembly plants, which can provide customers with PCB one-stop service, and at the same time can also provide product assembly. If you have a product, please contact us.
Our Experts Team
Talk to the Experts
Let us help you get started with our superior electronics manufacturing service (EMS). You can reach to us by the the contact information below.
Or you can fill out the form on the right to get reach to us directly, we will reply you at once.
CONTACT INFO
: 4/F,5/F,6/F Xingyuan Technology Park, Gushu Tongda Road, Xixiang Town Baoan District, Shenzhen , Guangdong, China 518102
: Area A3, Phung Nenh Truce Industrial Zone(Nam Giang Industrial Park), Viet An City, Bac Giang Province, Vietnam
: +86-15817390087
: +86-755-23108895
: +86-755-29129721
: Victor Zhang
:sales@leadsintec.com
LATEST PRODUCTS
BLOG
FOLLOW US
