Led Driver Board (OEM/ODM)
LED driver is a power-adjusted electronic device that drives the normal operation of LED light or LED module components. Due to the LED PN junction conduction characteristics determine, it can adapt to the power supply voltage and current changes in a very narrow range, a slight deviation may not be able to light the LED or luminous efficiency is seriously reduced, or shorten the life of the chip or even burned.
Existing industrial frequency power supply and common battery power are not suitable for direct supply of LEDs, LED driver is this can drive the LED in the best voltage or current state of operation of the electronic components.
Led Driver Board
* PCB board file with parts list provided by customers
* PCB board made, circuit board parts purchased by us
* PCB board with parts assembled
* Electronic testing circuit board or PCBA
* Fast delivery, anti-static package
* RoHS Directive-compliant, lead-free
* One stop service for PCB design, PCB layout, PCB manufacture, components purchasing, PCB assembly, test, packing and PCB delivery
Leadsintec PCBA Manufacturing Service
* PCB fabrication from 1-32 layer. (single side, double side, multi-layer, HDI board, bury & blind holes board etc)
* Material procurement and management
* Quick-turn PCBA Prototype and NPI (new product introduction)
* PCBA and through hole assembly
* IC pre-programming & Function verification & burn in testing
* Complete Unit assembly (Box building include the plastic, screen, metal enclosure, membrane, coils, wire harness etc.)
* Small volume is accepted and High-mix models solutions
* AOI, In circuit test, BGA placement
* Engineering support including end of life and obsolete component replacement and design support for circuit, metal,plastic casing and packaging
Leadsintec PCB Manufacturing Capability
Surface processing | HASL/Plating gold / immersion gold /Plating gold finger/OSP/ Flux |
Layers | 1~32 layers |
Copper Thickness | O.5OZ~5OZ |
Board Thickness | 0.2mm~6.0mm |
Min Hole Size | 0.2mm |
Min Line Width | 0.1mm |
Min Line Spacing | 0.1mm |
Max board Size | 508mm*609mm |
Solder mask type | Green/ Black/ Red/ Yellow/ White/Blue… |
Silkscreen color | White / Yellow/ Black |
Data file format | Gerber file and corresponding drilling file, PROTEL series, BOM list |
Base material | FR4, CEM3, PTFE, Aluminum based, High TG FR4, High frequency board, Rogers |
PCBA Manufacturing Lead Time
Delivery for samples will be 10-15 days after OEM Contact is signed and the Engineering Documents are confirmed.
For Mass production, based on the customer requirements, delivery can be done in several batches