GSM GPS OBD (On-Board Diagnostic) Intelligent Tracker （Locator）
GSM GPS OBD (On-Board Diagnostic) Intelligent Tracker （Locator）
Model Number: SIH-OBD-660/650
Name: GSM+GPS+OBD remote vehicle diagnostic locator
Size: 60mm*46mm*27mm
Features: Ultra small volume, accurate positioning, mileage statistics, oil consumption statistics, point extinguishing report, all kinds of alarm reporting, driving behavior analysis
GSM GPS OBD (On-Board Diagnostic) Intelligent Tracker (Locator）Function Description
| Number | Function | Description |
| 1 | Remote fault diagnosis | Remote monitoring and diagnosis of vehicle fault in real time |
| 2 | Traffic data monitoring | Real-time monitoring of ECU data for driving process and acquisition of traffic status information |
| 3 | Accurate fuel consumption statistics | Obtain the relevant parameters from the bus , and get the oil consumption related data through the precision algorithm |
| 4 | Precise mileage statistics | Calculate the accurate mileage information according to the speed information |
| 5 | Trip report | At the end of each trip, the terminal uploads the travel data and the comprehensive results to the server. |
| 6 | Rapid acceleration alarm | In the process of vehicle driving, an urgent acceleration event occurs, and the equipment can report the alarm accurately |
| 7 | Emergency deceleration alarm | In the process of vehicle driving, there is a rapid deceleration event, and the equipment can report the alarm accurately |
| 8 | Emergency turn alarm | In the process of driving, a sharp turn event occurs, and the equipment can report the alarm accurately |
| 9 | High speed alarm | When the driving speed exceeds the set value, the equipment can report the alarm accurately |
| 10 | Overlong idle alarm | When the vehicle has not extinguished the fire time, the equipment will report to the police |
| 11 | High water temperature alarm | When the water temperature of the vehicle is high, the equipment reports the alarm |
| 12 | Overspeed alarm | Real-time monitoring of speed,when the vehicle exceeds the preset speed will be reminded |
| 13 | Vehicle bump alarm | When a vehicle has a serious collision or rollover, the equipment is actively reported to the police. |
| 14 | Low voltage alarm for battery | When the power of the vehicle is insufficient, the equipment will report the alarm on the initiative |
| 15 | Power outage alarm | When the terminal is out of power, the device voluntarily reports the alarm |
| 16 | Ignition and extinguishing notices | Real-time monitoring of vehicle ACC status, ignition and extinguishing notification information |
| 17 | Vehicle real-time tracking | The vehicle is tracked in real time by GPS |
| 18 | Blind area data supplement | When the vehicle enters the blind area of the signal, the terminal automatically stores the data of the blind area,
and the signal is automatically retransmitted after the signal is restored. |
| 19 | Secondary hibernation mode | To realize the dormancy of flameout and undervoltage dormancy, and to protect the vehicular battery in depth |
| 20 | SMS Settings and queries | Setting and querying terminal parameters via SMS. |
| 21 | The remote upgrade | The remote upgrade terminal firmware is implemented by SMS or platform, and a detailed update log is provided
before each upgrade. |
| 22 | Actively report the VIN number | After the vehicle is ignited, take the initiative to report VIN |
GSM GPS OBD (On-Board Diagnostic) Intelligent Tracker （Locator）Specification
| Category | Indicator Description | ||
| Volume | Long x width x height 60mm × 46 mm × 27 mm | ||
| Operating Voltage | DC: 9-30V | ||
| Average Power Consumption | ＜1W | ||
| Stand-by Power Consumption | ＜0.4W | ||
| Battery Capacity | ＞150mAH | ||
| Air Discharge | ±8KV | ||
| Satellite Positioning Parameter | Receive frequency: 1575.42 MHZ | ||
| Capture sensitivity: -145 dbm | Tracking sensitivity: -160 dbm | ||
| Speed precision: ≤0.1m/S | |||
| Location data update rate: 1 / s continuous | |||
| Speed of communication: 9600bps | |||
| Cold start: 35S@-130dBm (open space) | |||
| Warm start: 5S@-130dBm | |||
| Communication Module Parameters | Inland: 900/1800MHz | Some parts of the world: 850/1900MHz | |
| Maximum emission power: 2W, average working current is less than 300ma 3.7V | |||
| Data transmission mode: network, short message | |||
| Mode of communication: TCP/UDP | |||
| Environmental Parameters | Operating temperature: –20℃~+70℃ | ||
| Storage temperature: -40℃～+80℃ | |||
| Working humidity: 15%～75% | |||
| Antenna | Built-in GSM antenna | ||
| Built-in GPS antenna | |||
| State of The Lamp | OBD data lamp | ||
| GSM status lamp | |||
| GPS status lamp | |||
| Acceleration Sensor | Three axis: x/y/z | ||
| Measuring range: ±16g | |||
| sensitivity: 4mg/LSB | |||
| Internal storage | 8Mbit Can save two to three days of driving data | ||
Our Experts Team
Talk to the Experts
Let us help you get started with our superior electronics manufacturing service (EMS). You can reach to us by the the contact information below.
Or you can fill out the form on the right to get reach to us directly, we will reply you at once.
CONTACT INFO
: 4/F,5/F,6/F Xingyuan Technology Park, Gushu Tongda Road, Xixiang Town Baoan District, Shenzhen , Guangdong, China 518102
: Area A3, Phung Nenh Truce Industrial Zone(Nam Giang Industrial Park), Viet An City, Bac Giang Province, Vietnam
: +86-15817390087
: +86-755-23108895
: +86-755-29129721
: Victor Zhang
:sales@leadsintec.com
LATEST PRODUCTS
BLOG
FOLLOW US
